Updating system settings

Like a PHONE port, a LINE port has a basic UI (User Interface) for I/O (Input / Output) of signalling or control messages: The OBi LINE port supports the following inputs: DTMF, Polarity, CPC, Caller ID, Ring, Tone The OBi LINE port supports the following outputs: DTMF/Tone, On Hook, Off Hook, Hook Flash* The OBi LINE port will assume a call is Connected on the following conditions: End of dialing for outbound calls Off-hook for inbound calls The OBi LINE port will assume a call is Disconnected on the following conditions: Power Down, CPC, Long Silence, or Disconnect Tone Note: The OBi2 Series models have a USB port that can be attached to an external USB storage device, such as a USB flash drive or USB hard disk drive.

The devices native web server includes functionality for browsing the contents on the attached USB device and sharing them selectively with other parties.

You may connect an OBi LINE USB to FXO adapter to the USB Port of the OBi device to provide an extra Line port.

In that case, many of the Line Port related features and configuration parameters described in this guide will be applicable on that device.

The admin will have full access while a user level access can be restricted.

Anonymous access is limited to read-only without being prompted by the OBi device to enter a User ID or Password.

When a group heading has more than one level, each level is separated with a -, such as Services Providers - ITSP Profile A SIP:: For OBi models that have a USB Port, an OBi LINE USB to FXO adapter accessory may be attached to provide an additional LINE port.

As such, references in this document that describe configuration or behavior of the LINE port or Li interface apply to the OBi110 or devices with an OBi LINE USB to FXO adapter attached.

The OBi TALK portal is also where members can download the OBi ON applications for the i Phone, i Pad, i Pod touch & Android devices, respectively.

Use of any power adaptor other than what was provided with the OBi will void the warranty and may cause the unit to not function at all or cause undesired operation.

There are four (4) LED lights on the top of the OBi.

The OBi PHONE port has a Maximum Sessions capacity of two (2).

When the OBi PHONE port goes On-Hook this will end current call and invoke a ring for the holding call.

Leave a Reply